Model 632 / 6
The Model 632 Process Heater will give an outlet temperature up to 300°C.
Technical Specification
Power
6 kW
Max inlet temp
120° C
Max exhaust temp
300° C
Max airflow
849 m3/hr
Features & Benefits
The Model 632 Process Heater consists of a single element assembly mounted inside a stainless-steel tube which is enclosed in an insulated jacket.
Maximum heat transfer
The jacket allows maximum heat transfer to the airstream while maintaining a low surface temperature. This makes the Model 632 ideal for mounting in vulnerable areas or in enclosures containing other equipment.
Flanged inlet / outlet
The inlet of the 632 is flanged and the outlet is either flanged or provided with a Duct / Hose adapter.
Multiple loadings
The Model 632 Heater will give an outlet temperature up to 300°C and is available in loadings from 1 to 12kW.
Thermal cut-out
The inlet of the 632 can be fitted with a thermal cut-out to protect the element in the event of the airflow be-coming restricted. The Model 632 is designed to accept inlet air temperatures up to 250°C.
Temperature controls
A variety of temperature controls are available ranging from switching devices to provide fixed loadings through to systems to monitor and regulate the output temperature.
Range of adapters available
A range of adapters is available to couple the Model 632 with a variety of SECOMAK Fans.
Related case studies
-
Read MoreHot Air Drying – Stationary Print Drying
Secomak Direct Drive Fans and Heaters were specified and supplied to an industry leader in Print Drying Technology and Solutions.…
-
Read MoreAircraft Transmission Testing Using High Pressure Airflow
A prime aerospace, defence and security company needed consistent high pressure airflow to test aircraft transmission systems. With multiple test…
-
Read More5 years in the making… Secomak & SKF’s development partnership
Secomak and SKF have embarked on a transformative journey.
