Heaters
Heaters
  • Industrial Heater 632/9
  • Industrial Heater 632/9

Model 632 / 9

The Model 632 Process Heater will give an outlet temperature up to 300°C.


Power

Power

9 kW

Max inlet temp

Max inlet temp

120° C

Max exhaust temp

Max exhaust temp

300° C

Max airflow

Max airflow

849 m3/hr

Downloads

Everything you need

Features & Benefits

The Model 632 Process Heater consists of a single element assembly mounted inside a stainless-steel tube which is enclosed in an insulated jacket.

01

Maximum heat transfer

The jacket allows maximum heat transfer to the airstream while maintaining a low surface temperature. This makes the Model 632 ideal for mounting in vulnerable areas or in enclosures containing other equipment.

02

Flanged inlet / outlet

The inlet of the 632 is flanged and the outlet is either flanged or provided with a Duct / Hose adapter.

03

Multiple loadings

The Model 632 Heater will give an outlet temperature up to 300°C and is available in loadings from 1 to 12kW.

04

Thermal cut-out

The inlet of the 632 can be fitted with a thermal cut-out to protect the element in the event of the airflow be-coming restricted. The Model 632 is designed to accept inlet air temperatures up to 250°C.

05

Temperature controls

A variety of temperature controls are available ranging from switching devices to provide fixed loadings through to systems to monitor and regulate the output temperature.

06

Range of adapters available

A range of adapters is available to couple the Model 632 with a variety of SECOMAK Fans.

Enquire About

Industrial Heater 632/9

Contact us
Industrial Heater 632/9

Related case studies

  • Marshall Aerospace Composite Curing

    Marshall Aerospace Composite Curing

    Marshalls Aerospace needed rapid heat up combined with precise temperature control to use in their composite curing ovens. Secomak’s Heat…

    Read More
  • Hot Air Drying – Stationary Print Drying

    Hot Air Drying – Stationary Print Drying

    Secomak Direct Drive Fans and Heaters were specified and supplied to an industry leader in Print Drying Technology and Solutions.…

    Read More
  • Using Heat To Neutralise Waste Contaminants

    Using Heat To Neutralise Waste Contaminants

    Roxel Propulsion Systems needed more airflow to neutralise contaminants from explosives using hot air over a prolonged period. The Secomak…

    Read More