Heaters

Heaters

  • Model 648/9
  • Model 648/9

Model 648 / 9

The Model 648 Heater will give an outlet temperature up to 300°C.


Power

Power

9 kW

Max inlet temp

Max inlet temp

120° C

Max exhaust temp

Max exhaust temp

300° C

Max airflow

Max airflow

2,378 m3/hr

Downloads

Everything you need

Features & Benefits

The Model 648 Process Heater consists of element assemblies mounted inside a stainless-steel tube which is enclosed in an insulated jacket.

01

Maximum heat transfer

The insulated jacket allows maximum heat transfer to the airstream while maintaining a low surface temperature. This makes the Model 648 ideal for mounting in vulnerable areas or in enclosures containing other equipment.

02

Flanged inlet / outlet

The inlet of the 648 is flanged and the outlet is either flanged or provided with a Duct / Hose adapter.

03

IP65 rated terminal box

The terminal box is manufactured from aluminium and is protected to IP65. Connection is made to each element using DIN rail termination for ease of wiring.

04

Multiple loadings

The Model 648 Heater will give an outlet temperature up to 300°C and is available in loadings of 6, 9, 12, 18, 20 or 24kW.

05

Thermal cut-out

The model 648 Heater will give an outlet temperature of 300°C. The inlet of the heater can be fitted with thermal cut-out to protect the element in the event of the airflow becoming restricted.

06

Temperature controls

A variety of temperature controls are available ranging from switching devices to provide fixed loadings through to systems to monitor and regulate the output temperature.

07

Range of adapters available

A range of adapters is available to couple the Model 648 with a variety of SECOMAK Fans.

Enquire About

Model 648/9

Contact us
Model 648/9

Related case studies

  • Aircraft Transmission Testing Using High Pressure Airflow

    Aircraft Transmission Testing Using High Pressure Airflow

    A prime aerospace, defence and security company needed consistent high pressure airflow to test aircraft transmission systems. With multiple test…

    Read More
  • Marshall Aerospace Composite Curing

    Marshall Aerospace Composite Curing

    Marshalls Aerospace needed rapid heat up combined with precise temperature control to use in their composite curing ovens. Secomak’s Heat…

    Read More
  • Hot Air Drying – Stationary Print Drying

    Hot Air Drying – Stationary Print Drying

    Secomak Direct Drive Fans and Heaters were specified and supplied to an industry leader in Print Drying Technology and Solutions.…

    Read More